Cloud Revolution Handmade Coils
Brand: Cloud Revolution
Product Type: Handmade Coils
Cloud Revolutions hand made coils are now available at vapelink.Do you want something with a little larger surface area and perhaps even less resistance than your usual aliens? These Cloud Revolution stapled coils are the way to go!
Want a more relaxing rebuildable experience than the iciest of Malay juices (without the throat numbing)? Cloud Revolution's Steam Trains are your choo-choo-choice!
Are you looking for a mouth to lung or limited direct-lung coils? Look no farther than Cloud Revolution's Game Over MTL Alien Coils.
These coils are handcrafted in Australia using Sandvik (or equal quality) wire to assure maximum purity.
Cloud Revolution Coils Specifications:
1)Game Over Man - Original
Game Over Man the Alien Fused Clapton is my favourite to vape on and the first to build. Tri-core 26g Nichrome 80 gives you all the benefits of a fuse Clapton coil combined with the unique wicking properties of the alien fuse make this one coil that is hard to beat for all-around great performance. Game Over Man!!!
- Core: 3*26g Wire Buddha Nichrome 80
- Alien Fuse: 36g Wire Buddha Nichrome 80
- Wraps: 5
- Inner Diameter: 3mm
- Single Coil Resistance: 0.22
- Dual Coil Resistance: 0.11
2)Game Over Man - Triple 27
- Core: Three Pieces of 27g Wire Buddha 80
- Alien Fuse: 36g Wire Buddha Nichrome 80
- Wraps: 5
- Inner Diameter: 2.5mm
- Single Coil Resistance: 0.20-0.22
- Dual Coil Resistance: 0.10-0.11
3)Game Over Man - Triple 28
- Core: Three Pieces of 28g Wire Buddha Nichrome 80
- Alien Fuse: 36g Wire Buddha Nichrome 80
- Wraps: 5
- Inner Diameter: 2.5mm
- Single Coil Resistance: 0.30-0.32
- Dual Coil Resistance: 0.15-0.16
- Above Resistance, rating is dependent on lead length.
4)Game Over Man - MTL 0.7
Looking for some coils for a mouth to lung or restricted direct lung device? Look no further.
- Core: Three Pieces of 32g Wire Buddha Nichrome 80
- Alien Fuse: 40G Wire Buddha Nichrome 80
- Wraps: 5
- Inner Diameter: 2.5mm
- Single Coil Resistance: 0.7Ω Approx
- PowerBand: 15-30W
5)AIOLIEN
The AioLien. AKA Game Over Man BB edition. This is my recipe for the perfect RBA bridge or single-coil RTA application. Are they going to be your "Snailien"? Your "ExoTereastrial"? Whatever the application these will have you punching dense clouds.
- Core: Three Pieces of 28g Wire Buddha Nichrome 80
- Alien Fuse: 3G Wire Buddha Nichrome 80
- Wraps: 5/6
- Inner Diameter: 2.5mm
- Single Coil Resistance: 0.34Ω Approx
- PowerBand: 25-45W
6)Steam Train 24
- Core: Two Pieces of 24g Wire Buddha Kanthal A1
- Fuse: 36g Wire Buddha Kanthal A1
- Wraps: 5
- Inner Diameter: 3mm
- Single Coil Resistance: 0.3
- Dual Coil Resistance: 0.15
7)Steam Train 26
- l A1 Sandvik Wire
- Core: Two Pieces of Wire Buddha 26g Kanthal A1
- Fuse: 36g Wire Buddha Kanthal A1 Sandvik Wire
- Wraps: 5
- Inner Diameter: 3mm
- Single Coil Resistance: 0.4
- Dual Coil Resistance: 0.2
8) FLAVLIENS
- Core: 10 x 0.3mm Nichrome 80 Ribbon Wire
- Frame: Two Pieces of 30g Nichrome 80
- Alien Fuse: 36g Nichrome 80
- Wraps: 5
- Inner Diameter: 3mm
- Single Coil Resistance: 0.22Ω
- Dual Coil Resistance: 0.11Ω
9)Fralien 2x700
- Core: 8 x 0.3x0.1mm Nichrome 80 Ribbon Wire
- Frame: Two Pieces of 28g Nichrome 80
- Alien Fuse: 36g Nichrome 80
- Wraps: 4
- Inner Diameter: 3mm
- Single Coil Resistance: 0.16-0.2
- Dual Coil Resistance: 0.08-0.1
Note: Rebuilding is for experienced users only and a knowledge of ohms’ law should be considered when building coils for Rebuildable Atomisers. The distance of the coils from the post can affect the resistance of the build. Always exercise caution building your atomiser, always check your build’s resistance on an ohm reader before firing it on any device. Coils that are touching any part of the deck, airflow controller or any part of the coil touching any of the atomiser's posts can result in a short and can cause serious damage to your devices if not checked on an ohm reader before use. Make sure to use high drain and high amperage batteries when using advanced user devices.
