Utillian 722 Dry-Herb Vaporiser
Introducing the Utillian 722 Vaporiser – the perfect high performance convection style vaporiser. If you’re looking for an affordable and easy-to-use device that offers full spectrum vaporisation for your herbs, then the Utillian 722 is the way to go.
With its impressive convection heating chamber, the Utillian 722 vaporiser produces high-quality vapour that is unmatched by other vaporisers on the market. The large heating chamber can hold up to .4 grams of herb and uses convection heating to heat your material with hot air instead of direct contact with the heat source. This results in better airflow and a more even cook for your herbs.
What sets the Utillian 722 apart is its enhanced boost mode. Activating the boost mode is simple – just press and hold the power button, and the device will rapidly heat up to 225C°. This is a higher maximum temperature than its predecessor, the Utillian 721, which means better extraction for your dry herbs. The boost mode is perfect for finishing your session.
The 722 vaporiser is designed with ease of use in mind. It features a single button operation that allows you to turn the device on and off, toggle temperature settings, and enable boost mode all with the same button. This makes the device extremely easy to use and effortless to vape.
In addition to its simplicity, the Utillian 722 also features four base temperature settings ranging from 180C° to 210C°. This offers an effective range for vaporizing your dry herb and provides ample options for choosing your favorite temperature range.
The Utillian 722 has also refined its airflow with a new wider mouthpiece and optimized airflow. The wider mouthpiece helps refine the air pathway, allowing for more vapour to pass through at one time. This means bigger clouds and smoother draws. The mouthpiece itself is a massive improvement over the 721, providing an even better vaping experience.
Overall, the Utillian 722 vaporiser is the perfect choice for anyone looking for a high-quality convection style vaporiser that is affordable, easy to use, and produces full spectrum vaporisation for your herbs. Get yours today and experience the 722!
Specifications
- Manufacturer: Utillian
- Battery: 2300 mAh
- Battery life: 60 minutes
- Heat time: 30 seconds
- Heating style: Convection
- Temperature: 180C° / 190C° / 200C° / 210C° / boost mode = 225C°
- Compatibility: Herbs
- Warranty: One year
- Key features: Convection heating / single button operation / boost mode
The Utillian 722 has five temperature settings, which are as follows:
- Green: 180 C°
- Blue: 190 C
- Purple: 200 C°
- Red (solid): 210 C°
- Red (flashing): 225C°
To activate the boost mode, hold down the power button for two seconds. The LED will start flashing red when you’ve entered boost mode. The device will fire at its maximum temperature of 225C° for as long as you hold it. Boost mode is useful when you want to quickly finish out a session or blast off.
What’s in the box
- 1x Utillian 722 vaporizer
- 3x O-ring and screen sets
- 1x USB Cable
- 1x Tweezers
- 1x Brush
How To Use: Utillian 722 Vaporiser
Please read the instructions provided in the box before using the Utillian 722 Vaporiser.
Step 1: Prepare the device
Connect the provided USB charging cable to the charging port on the vaporiser. Connect the other end of the cable to a power source, such as a computer or wall adapter. Allow the vaporiser to charge until the battery is fully charged. The LED indicator on the vaporiser will typically show the charging progress.
Step 2: Loading the chamber
Remove the mouthpiece and chamber cover to access the heating chamber. Grind your dry herb material to a medium-fine consistency. Load the ground herb into the heating chamber. Avoid overpacking to ensure proper airflow. Replace the chamber cover securely to close the chamber.
Step 3: Powering on the vaporiser
Press the power button located on the vaporiser five times rapidly to turn it on. The LED indicator will typically light up to indicate that the vaporiser is powered on. Some models may require additional button presses or hold times to activate.
Step 4: Adjusting the temperature
Use the up and down buttons on the vaporizer to adjust the temperature settings. The Utillian 722 Vaporiser typically offers a range of temperature options. Select your desired temperature based on your personal preference and the type of material you’re using. Allow the vaporiser a few moments to reach the set temperature.
Step 5: Heating and vaporising
Once the vaporiser has reached the set temperature, it will begin heating the herb material. Take slow, steady draws from the mouthpiece to inhale the vapour. Experiment with different draw techniques and airflow adjustments to find what works best for you.
Step 6: Powering off the vaporiser
To turn off the vaporiser, press the power button five times rapidly. The LED indicator will typically turn off, indicating that the vaporiser is powered off.
How To Clean: Utillian 722 Vaporiser
Step 1: Disassemble the vaporiser
Ensure that the vaporiser is turned off and cooled down before starting the cleaning process. Remove the mouthpiece, chamber cover, and any other detachable components from the vaporiser.
Step 2: Clean the mouthpiece
Soak the mouthpiece in isopropyl alcohol for about 30 minutes to loosen any residue. After soaking, use a brush or cotton swab to scrub the mouthpiece and remove any buildup. Rinse the mouthpiece thoroughly with water to remove any remaining alcohol or cleaning solution. Allow it to dry completely before reassembling.
Step 3: Clean the chamber cover and screen
Remove the chamber cover and screen from the vaporiser. Use a brush or cotton swab to gently clean the chamber cover and screen, removing any residue or buildup. If necessary, you can soak the chamber cover and screen in isopropyl alcohol to further clean them. Rinse them thoroughly with water and allow them to dry completely before reassembling.
Step 4: Clean the vapour path
Use a cleaning brush or pipe cleaner to clean the vapour path of the vaporiser. Insert the brush or pipe cleaner through the vapour path and twist it to remove any residue or buildup. You can also moisten the brush or pipe cleaner with isopropyl alcohol for more thorough cleaning. Be careful not to damage any delicate components while cleaning.
Step 5: Wipe down the exterior
Use a soft cloth or paper towel dampened with isopropyl alcohol to wipe down the exterior of the vaporiser. Pay attention to any areas with residue or buildup, such as the buttons or the screen. Make sure to avoid getting any liquid into the battery or electronic components.
Step 6: Reassemble the vaporiser
Once all the components are clean and dry, reassemble the Utillian 722 Vaporiser. Attach the mouthpiece, chamber cover, screen, and any other detachable components. Regular cleaning and maintenance are important for the optimal performance and longevity of your Utillian 722 Vaporiser. It’s recommended to clean the vaporiser after each use or when you notice a decrease in performance. Refer to the user manual or manufacturer’s guidelines for any specific cleaning instructions or precautions related to your Utillian 722 Vaporiser.